|
|
 |
 No silver solder series |
 Low silver solder series |
 High silver solder series |
 Brass solder |
 Aluminum brazing |
 Flux |
|
 |
|
|
|
|
|
| |
| |
| CMC plastic injection mold argon welding series |
| 2015-8-31 |
|
|
CMC-75 hardness of HRC 25 ~ 27 1.0 1.2 1.6 2.4
For plastic injection mold of argon welding, loss of good flowers. Use in Xiemo welding, easy engraving.
CMC-PDS-3 Hardness HRC 28 ~ 30 0.9 1.0 1.2 1.6
For plastic injection mold of argon welding, heat-resistant mold, corrosion-resistant die, cutting property, loss of good flowers.
CMC-718H hardness of HRC 30 ~ 33 0.9 1.0 1.2 1.6
For plastic injection mold of argon welding. After welding good machinability, high-purity material uniformity, polishing of optical good, good light etching
CMC-2738 hardness of HRC 32 ~ 35 0.9 1.0 1.2 1.6
Large injection molding, mold resistant, corrosion-resistant mold, corrosion spend good, with excellent processing performance, easy cutting and electrical erosion. Excellent photo-etching
CMC-P20 hardness of HRC 30 0.9 1.0 1.2 1.6 2.0 2.4
Plastic injection mold, heat-resistant mold (copper mold)
CMC-P20H hardness of HRC 30 ~ 33 1.0 1.2 1.6
Strengthening hardness on the advantages of the original product CMC-P20
For plastic injection mold of argon welding. After welding machinability and loss of good flowers, high hardness material uniformity
CMC-P20Ni hardness of HRC 30 0.9 1.2 1.6 2.4
On the advantages of the original product CMC-P20 strengthening polished performance suitable for plastic injection mold of argon welding. Machinability and excellent light etching after welding
CMC-NAK80 hardness of HRC 35 ~ 40 0.9 1.2 1.6 2.4
Plastic injection molding, mirror steel
CMC-NAK100 hardness of HRC 35 ~ 40 0.9 1.6
Strengthening polished performance on the advantages of the original product CMC-NAK80
There are very good polishing requirements
CMC-S136H hardness HRC50 ~ 54 0.9 1.2 1.6 2.4
Anti-acid mold steel, suitable for the production of special argon welding rod PS, SAN plastic injection mold it. After welding with excellent corrosion resistance, polishing and abrasion resistance, machinability, excellent stability when hardened.
CMC-2316 hardness HRC30 ~ 34 1.2 1.6
Anti-acid mold steel, suitable for PVC, POM, CA |
|
Previous:Large mold welding CMC series
Next:CMC iron / backing argon welding series
|
|
|
|
